How to solve the problem of poor black shark 5 RS signal

Mobile phone signal is very important. Although most people use WiFi more now, they need signal and traffic without WiFi. However, some mobile phones have signals but the network is very poor, or there is no signal in the place where there is a signal, which is rare. Many people do not know what to do. Xiaobian brings a solution to the problem of poor or no signal of Black Shark 5RS, helping users get out of trouble quickly.

What should I do if the black shark 5 RS signal is bad? Solution to Black Shark 5 RS Signal Difference

The mobile phone can recognize the SIM card, but the signal is poor (weak signal), unable to make or receive calls; There are many reasons for poor mobile signal (weak signal), such as the surrounding environment, weather, location, operators themselves, common use habits (such as using metal protective sleeves), system failures, mobile phone hardware, etc; The following methods are recommended:

1. The phone cannot be dialed or received, but the signal bar of the mobile phone displays normally. First, check whether the SIM card is in arrears;

2. Select reasonable network type settings according to the operator of the SIM card used. It is recommended to select 4G first;

3. Whether this is also the case when trying to make a phone call in another location, such as outdoor, non interfering environment, etc. It is ruled out that the mobile phone signal is weak due to the poor signal of the operator due to the use environment (such as basement, tunnel, relatively closed buildings, etc.);

4. Determine whether it is the operator's own network problem. For example, check whether the network of the same operator used by colleagues or friends is normal. In addition, it does not rule out the reason for the aging of the SIM card. Try to replace a SIM card with the same operation and network;

5. Some protective cases on the market adopt large-area electroplating process in pursuit of beauty. The metal in them will shield the mobile phone signal, thus affecting the reception and transmission of the mobile phone signal. If such protective cases are used, it is recommended to temporarily remove them and check the signal;

6. It is recommended to check whether the MIUI version is the latest version (there are relevant prompts on the MIUI version page). It is recommended to update to the latest version of MIUI, and then check the mobile phone signal bar or make a call attempt;

7. After eliminating the external reasons such as the problems of the local network operator, the interference of the environment used, and the system problems, set up My Device>& gt; All Parameters>& gt; Status information - SIM card status, or enter * # * # 4636 # * # * *> in the dialing interface& gt; In the mobile phone information, check the signal strength of the mobile phone. Generally, it is - 50dbm_- 90dbm belongs to the relatively normal range. If it is above - 100dbm and occasionally jumps to the normal range, there may be some problems with the signal. You need to go to Xiaomi authorized repair service center with your mobile phone for detection and processing.

Because Black Shark 5RS is also a Xiaomi series mobile phone, Xiaomi's mobile phone has been complained about signal problems by users before, which has never been an effective solution, but fortunately, the probability of problems is relatively small. If similar problems occur next time, the above methods can be used to solve them. Users who need to save this page can.