Redmi K40S machine brushing tutorial

After you buy a mobile phone, you can basically use it directly. However, since the mobile phones sold on the market are all installed with the latest official version of the system, if users need to develop some functions, they need to swipe the phone themselves to the required system to obtain the corresponding functions. The following is a very cost-effective course for you to use the Redmi K40S, a new Red Rice mobile phone.

How do I clean the RedmiK40S? RedmiK40S machine brushing tutorial

1. Download and unzip the brush tool, double-click "XiaoMiFlash. exe" to run, click [Driver] to pop up a window, and then click [Install]

2. When the phone is powered off, press and hold the Volume Down+Power button to enter Fastboot mode to connect the phone USB to the computer.

3. After downloading the wire brushing package, unzip it, open the folder of the wire brushing package, and copy the address in the address bar

4. Paste the content of the path you just copied to the path

5. Click to load the device, and the mobile phone will be automatically recognized by the machine brushing program, and then click to start the machine brushing

6. For models with BL locks, "Delete All and Lock" will be selected by default. For models without BL locks, "Delete All" needs to be selected manually

7. Then wait, as shown in the figure, it indicates that the phone has been successfully flushed, and the phone will start automatically.

The above is the tutorial of the Redmi K40S. I believe everyone has successfully flushed their mobile phones to the system they want. Even if there are problems, they can probably be solved through the tutorial. I hope it can help everyone.