Redmi Note 11E Scrub Tutorial

Although everyone can directly boot into the system after buying a mobile phone. However, the entered system is generally a formal version system, which is stable, but some useful functions cannot be used. This requires a development version of the system. If users have requirements, they can perform their own machine brushing and get the corresponding functions from the required system. Now we will bring you the machine brushing tutorial of Redmi Note 11E for your convenience.

How does Redmi Note 11E brush the machine? Redmi Note 11E Machine Cleaning Tutorial

1. Download and unzip the brush tool, double-click "XiaoMiFlash. exe" to run, click [Driver] to pop up a window, and then click [Install]

2. When the phone is powered off, press and hold the Volume Down+Power button to enter Fastboot mode to connect the phone USB to the computer.

3. After downloading the wire brushing package, unzip it, open the folder of the wire brushing package, and copy the address in the address bar

4. Paste the content of the path you just copied to the path

5. Click to load the device, and the mobile phone will be automatically recognized by the machine brushing program, and then click to start the machine brushing

6. For models with BL locks, "Delete All and Lock" will be selected by default. For models without BL locks, "Delete All" needs to be selected manually

7. Then wait, as shown in the figure, it indicates that the phone has been successfully flushed, and the phone will start automatically.

The above is the machine brushing tutorial of Redmi Note 11E. The whole operation is not difficult. It only takes a few simple steps to complete the machine brushing. Most problems can be solved in the tutorial. I hope it can help you.