Xiaomi 13S Ultra Brush Machine Tutorial

After the purchase of mobile phones, all the pre installed systems are official systems. Although the stable version of the system is better than the stable version, some functions are not as easy to use as the test version of the system, and the practicability is not high enough. However, the beta system is not officially pre installed for users, and users need to perform their own machine brushing operations to get to the beta system. Xiaobian brings you the Xiaomi 13S Ultra machine brushing tutorial, which is convenient for everyone to operate.

How does Xiaomi 13S Ultra brush the machine? Xiaomi 13S Ultra Machine Brushing Tutorial

1. Download and unzip the brush tool, double-click "XiaoMiFlash. exe" to run, click [Driver] to pop up a window, and then click [Install]

2. When the phone is powered off, press and hold the Volume Down+Power button to enter Fastboot mode to connect the phone USB to the computer.

3. After downloading the wire brushing package, unzip it, open the folder of the wire brushing package, and copy the address in the address bar

4. Paste the content of the path you just copied to the path

5. Click to load the device, and the mobile phone will be automatically recognized by the machine brushing program, and then click to start the machine brushing

6. For models with BL locks, "Delete All and Lock" will be selected by default. For models without BL locks, "Delete All" needs to be selected manually

7. Then wait, as shown in the figure, it indicates that the phone has been successfully flushed, and the phone will start automatically.

The above is the Xiaomi 13S Ultra machine brushing tutorial. The overall operation is not very difficult. It is basically based on the official Xiaomi machine brushing tutorial. Most problems can be solved in the tutorial.