Home Wiki Using Tutorials What to do if iQOO Z6x signal is bad

What to do if iQOO Z6x signal is bad

Author:Yueyue Time:2022-11-25 01:12

The poor signal of the mobile phone is very troublesome, and some mobile phones are really exaggerated. The signal is so poor that they think they have entered the no man's land. Although the coverage of the mobile phone signal is very high in the current era, the network signal will still occur when users use the mobile phone. When the signal is poor, the mobile phone will change bricks, so everyone will want to try different solutions, This compilation brings you the solution of iQOO Z6x in terms of signal difference. I hope it can help you with your use.

What to do if iQOO Z6x signal is bad

What to do if the iQOO Z6x signal is bad

The signal status of the mobile phone SIM card is mainly related to the network environment. If the mobile phone has no signal, does not recognize the SIM card, and the signal is poor, you can refer to the following steps and methods to determine the problem:

1. Check the mobile phone protective case

The mobile phone uses metal or magnetic protective covers or supports, which have an impact on the mobile phone signal. It is recommended to take them off and try again.

2. Troubleshooting environmental causes

In some areas, the mobile phone may have no signal or poor signal due to the lack of coverage of the operator's network. It is recommended to compare and judge with other mobile phones of the same operator in the same location.

3. Restart the phone

You can try to restart the phone, let the phone reload the SIM card, and see if the SIM card can be recognized.

4. Check the SIM card

Re install the SIM card, and confirm that the SIM card is consistent with the mobile phone installation logo and in good contact with the mobile phone; If conditions permit, you can replace another SIM card that can be used normally to the phone for comparison to confirm whether it is the phone or the SIM card.

Note: Non all Netcom models only support SIM cards of some operators.

5. Check the phone settings:

① Check flight mode

Check whether there is an "airplane" icon in the status bar of the phone. If there is an "airplane" icon, please enter [Settings] or [Settings> Other Networks and Connections] to turn off "Flight Mode".

② Switch data card

If the phone is installed with dual cards, and one card has no signal, you can enter [Settings> Dual Card and Mobile Network] to switch whether the data card can be restored.

6. Telephone card aging

The mobile phone card has been used for a long time, so you need to take your ID card to the mobile phone business hall to change it

7. Environmental problems

Check whether you are in a parking lot or an enclosed place like an elevator. After you go out, the signal will basically be restored

If the above operations cannot be solved, you can back up the mobile phone data in advance, carry the mobile phone and the purchase voucher to the vivo customer service center for detection, enter the browser to search the vivo official website -- service -- service center -- view all -- select provinces and cities to query the local service center address and contact information.

Does iQOO Z6x support fingerprint identification and unlocking

Supported

IQOO Z6x supports side fingerprint

It also supports Face Wake facial recognition

The above is the specific content about how to deal with the iQOO Z6x signal problem. Under different circumstances, you can choose different solutions. Now, so many functions of the mobile phone are used based on the traffic brought by the signal. Without the signal, these functions are useless.

Related Wiki