How to apply the film to iPhone 14 plus
As a large screen smartphone officially launched by Apple at this press conference, the iPhone 14 plus has a larger screen and longer service life than the ordinary version, which has attracted many users. In addition, this Double 11 event has made a substantial discount on the price of this phone. So in order to facilitate you to paste the film on this phone as soon as you get it, I have compiled the relevant film pasting methods for you below, I hope you like it!
How to apply the film to iPhone 14 plus
1. Cleaning the screen: use BG dust remover to clean stubborn dirt. After cleaning with a cloth, if there is still stubborn dirt on the screen, it is important not to use a wet cloth to clean it. Just stick the BG dust remover on the dust, lift it, and use the adhesion of the dust remover to remove the dust. BG dedusting sticker is pasted back to the original backing paper after use and can be used repeatedly.
2. Understand the position and size of the film: take the protective film out of the package, do not tear off the release film first, and put it directly on the mobile phone screen to get a preliminary impression of the film, especially observe the adhesion between the film edge and the mobile phone screen, so as to have a general understanding of the position of the film, which will help the subsequent film application process. Tear a part of the release film ①: observe the label on the protective film, tear a part of the release film marked "①", and pay attention not to touch the adsorption layer of the protective film with your fingers. Each protective film product is divided into three layers, of which ① and ② are release films, which protect the middle protective film.
3. Slowly paste the protective film onto the mobile phone screen: align the adsorption layer of the protective film with the corner of the screen, make sure that the position is aligned, and then paste it carefully. While pasting, tear off the ① release film. If bubbles are generated during the pasting process, pull back the film and paste it again. After confirming that the film position is completely correct, completely tear off the ① release film. After the whole protective film is pasted on the screen, if there are still bubbles, you can use the BG scratch card to scratch the screen once to exhaust the air. Slowly paste the protective film onto the phone screen
4. Tear the release film ② completely
5. Tear the release film ② completely, wipe the screen with a cloth, and the whole film pasting process is announced to be completed.
The iPhone 14 has a built-in 3279 mAh battery, while the iPhone 14 Plus has been upgraded to 4325 mAh, which is exactly the same as the iPhone 13 ProMax released last year. For a long time, this phone has been the king of endurance in the industry. So the endurance experience of the iPhone 14 Plus will never disappoint you. According to the official data, compared with the 20 hours of the iPhone 14, the maximum video playback time of the iPhone 14 Plus can reach 26 hours, and the audio playback time has increased from 80 hours to 100 hours.
Due to the increase of battery capacity, the charging speed of the iPhone 14 Plus is slower. It takes 30 minutes to fully charge the iPhone 14 with 50% power, while it takes 35 minutes for the iPhone 14 Plus.
The above is how to apply the film to the iPhone 14 plus. Is it very simple? It only takes five simple steps to perfectly attach the film to the phone. The screen quality of this phone is quite good. In daily use, you just need to be as careful as possible not to bump or break it!
