What to do if iPhone 14 plus is flooded
The iPhone 14 plus is a large screen version of the mobile phone launched by Apple this time. Although the sales volume has not been good since it was launched, many small partners who like large screen phones are really popular because of the super high discounts on the Double 11 Festival. However, some small partners have water problems in their daily use. What should we do now? Now let's make a detailed introduction to the specific methods!
What to do if the iPhone 14 plus is flooded
1. Remove the mobile phone from the water as soon as possible, and turn off the power immediately
This is very important. No matter whether the screen turns black or not, please shut it down quickly to prevent the motherboard from short circuit and burning. If you can't shut it down by pressing the power key for a long time, please hold down the power key and the Home key until the system shuts down.
2. Take out the SIM card, remove the phone case and other objects, and use a paper towel or cloth to remove the water outside the body and in the gap
Wipe the SIM card as soon as possible after removing it. Pay attention to the earphone and power connector. You can use a small cotton swab or paper towel to dry them.
3. Wrap the machine body with a towel or paper towel with good water absorption to absorb water.
Never use the method of throwing. Swing will make the water that has entered the interior of the fuselage spread and touch the components that cannot touch the water, causing worse results.
4. In case of light water ingress, the machine body can be wrapped with a paper towel, and a small bag of desiccant (often attached to food) can be put into the bag at the same time, or a bag full of rice can be put into the bag to empty the air as much as possible and seal. Then put the whole set of things in a slightly hot place, such as the computer heating place.
Note: Do not put it in a high heat environment or blow it with a hot air cylinder, which will damage the internal components. Keep waiting until there is no fog. It is better to leave it for another half day, take it out, and naturally return to the room temperature.
The iPhone 14 Plus with the "full blood version" A15 will have a 3D performance advantage of about 10% when compared with the previous generation models with the "non full blood version" in the theoretical test. The performance gap between the iPhone 14 Pro Max and the A16 on the iPhone 14 Pro Max will vary from 10% to 60% depending on the load, especially under extremely heavy loads. However, if it is a general light or medium load, the gap is not so obvious.
The iPhone 14 Plus, with a mature chip design and a larger body size, has become the one with the lowest body temperature under the measured heavy load scenario. Even compared with the iPhone 14 Pro Max, which has a more advanced manufacturing process in theory, the iPhone 14 Plus has a lower temperature at most measuring points.
In other words, as long as A15 is not fully equipped with games (at least not yet available), the iPhone 14 Plus may be more suitable for long-term games in the iPhone 14 series.
The above is the specific method for iPhone 14 plus to deal with water ingress. Users can protect their mobile phones as much as possible according to the above method. As long as there is no water ingress, it can basically solve your problem, but if the motherboard is damaged, they only choose to go to the store to replace it!
