How to brush OPPO Find N2

Machine brushing is a very complicated thing, and many little partners do not know how to operate it. And according to different mobile phone brands and systems, the methods of brushing the phone are also different. If there is no research, it is likely to cause harm to the phone. So, as a mobile phone that has just been released for two days, how can OPPO Find N2 be used to refresh the phone? Next, let Xiao Bian bring you a detailed machine brushing tutorial.

How does OPPOFindN2 brush the machine? OPPOFindN2 machine brushing tutorial

I. Preparation

Download the firmware upgrade package on the OPPO official website to get the update.zip file (if the downloaded upgrade file has a suffix of ". rar", for example, 10089_11_3.21_110923_update.rar, you need to unzip it to get the update.zip file. If the downloaded firmware upgrade file is update.zip, you do not need to unzip it); And copy the update.zip to the root directory of the mobile phone storage (note: after connecting to the computer, the disk name displayed in the mobile phone storage should be "phone", and do not copy it to the TF card, otherwise it will not be upgraded).

Step 2

1. Turn off the phone, remove the battery and reinstall it.

2. In the power off state, push the slide cover and press the "H" key and the power on key for 3 seconds, then release them, and the power on screen appears.

3. Press "H" again to enter recovery mode.

4. Press the arrow key to select apply sdcard: update.zip, and then press Enter to start the upgrade.

5. After the upgrade is completed, you will be prompted with "Install from sdcard complete". Select reboot system now with the enter key on the keyboard, restart the machine, and the upgrade is complete.

6. After restarting the phone and entering the system, click Settings, select About Phone, and then you can view the current version number.

III. Attention

1. Remember to back up relevant data in advance.

2. The battery must be removed and reinstalled during the shutdown upgrade.

3. The Update.zip file must be copied to the root directory of the phone memory.

4. The whole upgrade process takes about 5 minutes. Please wait patiently.

5. If the upgrade is not successful, you can start the machine and enter the settings - after restoring the factory settings, try the upgrade again.

This is the end of the introduction about how to use OPPO Find N2. The overall operation steps are very complicated. You need to carefully read the above contents. Don't make mistakes, or your mobile phone will be damaged easily.