Vivos 16e brushing tutorial

With the continuous improvement of technology, the choice of operating system for smart phones today is much richer than before. There are not only MIUI and Magic UI for secondary creation based on Android system, but also Hongmeng system, which is completely self-developed. This also improves the utilization rate of the classic operation of swiping machine to a certain extent. This small editor brings you the relevant tutorials of vivos16e on swiping machine.

vivos16e Flash Tutorial

1. It is recommended to clear all data in the mobile phone before brushing firmware to ensure that the machine is not affected by abnormal data. Press and hold the power key and the volume up key at the same time when the phone is turned off, until the word "Vivo" appears and then release, the phone automatically enters the recovery mode (some models need to press the volume key to manually select the recovery mode).

2. Select Clear Data to enter the selection interface. There are two options: Clear Cache and Clear All Data. Clear the cache data (equal to the English Wipe cache partition). Clear all data (equal to English Wipe data/factory reset).

3. After the mobile phone is dual-cleared, you can officially start to brush the firmware. First, go to the Vivo official website to download the firmware package: www.vivo.com.cn/upgrade/index, select the corresponding model, and then click "Resource Download" to download the corresponding firmware upgrade package (full package) under the firmware upgrade:

4. After the download is completed, put the upgrade package in the USB flash drive or SD card root directory (meaning do not put it in any folder). Note: The screen cannot be operated in the recovery mode, the volume up and down keys can move the cursor, and the power key determines the options.

5. Press and hold the power key and the volume up key at the same time when the phone is turned off, until the word "Vivo" appears and then release, the phone automatically enters the recovery mode (some models need to press the volume key to manually select the recovery mode).

6. Select "Install and upgrade software", and the interface will jump to choose whether to upgrade from internal storage or external SD card. For example, the downloaded installation package is placed in the root directory of the mobile phone's U disk, and you can select the mobile phone's storage.

7. Then it will jump to the interface of selecting the upgrade package, and select the upgrade package downloaded in advance.

8. There is a progress bar in the upgrade interface. After reading the progress bar, the upgrade is completed.

9. Click OK to jump to the recovery interface, and then restart the phone.

The above is the specific content of the vivos 16e brushing tutorial. When selecting the brushing package, users must find the appropriate one for their own model. Otherwise, it is easy to fail to brush, which will affect the use of mobile phones. In addition, professional brushing software on the market is also a good choice.