What to do if Xiaomi 13 Pro breaks touch

The performance of Xiaomi 13 Pro, the latest flagship mobile phone launched by Xiaomi, can be said to be very satisfactory to most people. It is not only very high in sales, but also highly praised by users. Many people choose to start this model. Although the quality of this mobile phone is very good, there are still some friends who have encountered various problems, one of which is the problem of screen disconnection, So how should we solve this problem? Now let's make a detailed introduction for you!

What to do if Xiaomi 13 Pro breaks touch

1. First, it is necessary to confirm whether the screen of the mobile phone is damaged by cracks or water; In case of man-made damage, go to Xiaomi Authorized Service Center for detection and treatment;

2. Whether the charger or power supply is connected in case of use failure. If the problem occurs when connecting the power supply, it is usually caused by unstable voltage or not using the original charging adapter. It is recommended to use the original data cable and charger of Xiaomi as much as possible when charging, and select an environment with relatively stable voltage to charge and try again;

3. Whether the screen is not sensitive only when operating an application (game). If so, there may be abnormal and incompatible application (game) data. It is recommended to try after uninstalling the application (game);

If it is confirmed that the application (game) is a problem, it is recommended to download and install it again in the Xiaomi App Store or find the application (game) in the Xiaomi App Store and submit the problem feedback; If there is a problem with the application (game) downloaded and installed by non-Xiaomi App Store, it is recommended to contact the application developer by yourself;

4. Whether there are water stains or sweats on your fingers (after playing ball, just after exercising, etc.). If so, please dry your fingers or screen in time before attempting operation;

5. Whether to use non-original adhesive film and toughened film. If it is used, it is recommended to remove it and try it;

6. Enter the hardware detection mode "touch screen test", and the specific operation steps are as follows:

A. Enter the mobile phone dialing interface and enter * # * # 6484 # * * or * # * # 64663 # * * * to enter the hardware detection (CIT mode);

B. Slide up and down to select "touch screen test", and slide your finger on the screen to test the touch screen to see whether there is an open circuit in the sliding line and whether there are redundant lines in the non-slip area;

C. Some models can calibrate the screen, press and hold the task key, then select "Touch screen calibration", follow the interface prompts, click OK and do not touch the screen until the prompt of calibration success appears.

7. If the test fails or the calibration fails in the hardware detection mode, it is recommended to back up the data, update to the latest MIUI version or restore the factory without restoring the backup;

If none of the above methods solve the problem, it is recommended to take your mobile phone to the authorized maintenance center of Xiaomi for inspection and treatment.

We have seen a lot about the performance of the second generation Snapdragon 8. For the adjustment of the second generation Xiaolong 8 on Xiaomi 13 Pro, we mainly rely on the test results of Geekbench 5 (5.4.1) and refer to the test results of Angora Rabbit.

In the test of GeekBench5, the performance of Xiaomi 13 Pro was somewhat surprising. On the one hand, in the test of GeekBench5 of Xiaomi 13 Pro, the test results were not regular. The single-core performance fluctuated from 1430 to 1490 in both indoor and frozen environments, while the multi-core performance fluctuated from 4800 to 4900, far less stable than other models, and the multi-core performance could reach 5100.

This performance of Xiaomi 13 Pro, combined with the fact that the fuselage temperature has hardly changed during the whole test, is estimated that Xiaomi is conservative in setting the power consumption wall of Xiaomi 13 Pro. In order to limit the heat, the core temperature of the processor is strictly controlled.

The above is the specific solution of how to deal with the broken touch of the Xiaomi 13 Pro. The maximum touch sampling rate of this mobile phone is 240Hz, so it is enough for users to use. If there is a broken touch problem and the above methods cannot be solved, you can only choose to return to the factory for repair! Let's have a try!