Samsung S22Ultra Flash Tutorial
Machine brushing is a popular operation in the past. After all, the strength of the system has a great impact on the daily use. And replacing a new system not only makes the mobile phone more playable, but also can improve the user experience. So how to brush the machine on the new Samsung S22Ultra? This time, the editor has sorted out corresponding articles for you to answer your doubts.
Samsung S22Ultra Flash Tutorial
1. Wire brush method. The mainstream method of swiping on Samsung mobile phones is to connect the phone to the computer and operate on the computer to complete the swiping. The ROM package is usually in TAR format. This method is popular because it is simple and reliable.
2. Card brushing method. This method is to swipe the machine directly through the mobile phone. You can swipe the ROM, beautify the package, baseband, and kernel. The usual ROM package format is ZIP.
Prepare for Samsung mobile phone swiping
If you choose the wire brush method, prepare:
1. Samsung mobile phone driver. In order for the computer to recognize the mobile phone, you can download the driver of your own model through the Samsung official website. After downloading, extract it to the computer and install it.
2. Brush software. The software of Samsung mobile phone line brush is ODIN, which can be used for automatic brush conveniently.
3. ROM package. ROM package is called "read-only memory". Generally speaking, it is a mobile phone hard disk that has been written by ROM developer. Users can swipe it in and read it. Android Chinese provides a large number of ROM downloads.
If you choose card swiping method, please prepare:
1、Recovery。 Samsung mobile phones usually use CWM Recovery.
2. Brush software.
Steps of Samsung mobile phone swiping
The steps of line brush method are:
1. Enter the mobile phone brush mode. Keep the phone off, press and hold the volume down key+HOME key+power key at the same time, until the Android robot is released on the phone screen, and then immediately press the volume up key.
2. Open ODIN software operation. Open the ODIN software on the computer, connect the mobile phone to the computer, and a yellow icon will appear (if it does not appear, it means that the driver is not installed correctly, please reinstall it). In the operation interface, the user checks Auto Reboot, F. Reset Time, and PDA. In the dialog box after PDA, select the ROM file you need to brush in (note: the suffix name of the ROM package must be in TAR format, otherwise the software cannot recognize it). After the above operation, click the "START" button on the upper right, and the computer will enter the automatic machine brushing state.
3. The total brushing time is about 2 minutes. After brushing, the ODIN software interface will automatically restart the phone at this time. After restarting, the phone will complete the whole brushing process. The wire brush method is fast and convenient. Under the new ROM, the mobile phone takes on a new look.
The steps of card swiping are:
1. Brush CWM Recovery into the phone through ODIN software. The specific brushing method is the same as the line brushing method, but the downloaded CWM Recovery file needs to be selected in the dialog box after the PDA is checked.
2. Store the ROM package (ROM package with ZIP format suffix) into the phone memory card. Directly store the ROM package file in the root directory of the phone's memory card through the computer.
3. Enter the brush mode. When the phone is turned off, press and hold the volume increase key+HOME key+power key until the Samsung power-on interface appears, and then release the power key. At this time, the volume key is "Select", the power key is "OK", the left key is "Down", the right key is "Back", and the middle HOME key is "Up".
4. Perform dual Wipe. To clear the data in the phone (note: if you do not operate this step, the phone will restart indefinitely or get stuck in the first screen after the phone is swiped), first select wide date/factory reset, then press the power key to confirm, and finally select YES; Next, select wipe cahe, then press the power key to confirm, and finally select YES.
5. Brush in the ROM package. First select "install zip from sdcard", then select "choose zip from sdcard", and finally select the ROM package in ZIP format that you put in the root directory (note: if your ROM package is placed on an external SD card, it should be in the external_sd folder).
6. At this point, the whole process of card brushing is over. At last, press the right button continuously to return. When returning to the main interface, select "reboot system".
The above is the specific content about how to reset the Samsung S22Ultra. The steps are very simple, and it is also a common method in the Android world. If users are not satisfied with their own operating system, they may try to replace it with another one.
