Can Xiaomi 13 replace the battery by itself
The battery of smart phones can be said to be one of the most important hardware configurations, and after years of use, the health of the battery life of mobile phones will decline, which will have a great impact on the battery life of mobile phones, so many people will choose to replace the battery after the service life drops to a certain extent, but the price of replacing the battery in the official store is still relatively expensive, so can you replace it yourself? Now let's let Xiaobian introduce to you whether Xiaomi 13 can replace the battery by itself!
Can Xiaomi 13 replace the battery by itself
Yes, but it is not recommended to replace it by yourself. It is not only troublesome and the official store of Xiaomi does not support warranty if it is damaged, so it is better to give it to a professional!
1. First, press the Huawei Xiaomi phone power off button to turn off the phone.
2. Then attach the suction cup zh to the back cover of the phone, and then pull the suction cup firmly to open the back cover.
3. After removing the back cover of the mobile phone, remove the screws on the middle cover with a cross screwdriver.
4. After the middle shell screws are removed, you can see the motherboard inside by removing the middle shell.
5. Then use a plastic rod to remove the battery cable, display cable and tail plug cable buckle.
6. After the flat cable buckle is removed, tear off the protective tape attached to the battery, and then remove the display flat cable and the tail plug flat cable.
7. Use a hot blower to heat the battery, and then use a pry to slowly remove the battery from both ends of the battery.
8. After the battery is removed, attach adhesive tape to the new battery and install the new battery.
The above is the specific introduction of whether Xiaomi 13 can replace the battery by itself. Although it can be replaced by itself according to the above method, after all, the mobile phone is still a relatively sophisticated electronic device. Once it is damaged in the process of disassembling, it is not worth the loss, so it is better not to replace it by itself!
