What if there is no response to the Ace 2 earthquake warning

In the past two years, disasters have occurred frequently all over the world, and earthquakes are the most frequent, especially in the southwest of China. Earthquakes of varying magnitude occur almost every other period of time, which is likely to pose a serious threat to everyone's life and property. Recently, many users have reported that when an earthquake occurs, the earthquake warning on Ace 2 has no response at all. Now let's introduce the detailed solutions.

What if the Ace2 earthquake warning did not respond? What is the reason why the Ace2 earthquake warning did not respond?

The failure of earthquake warning is usually because the switch with intensity less than 2.0 in the earthquake warning is not turned on. As long as the switch is turned on, the earthquake warning will be carried out as soon as there is an earthquake nearby

When an earthquake occurs, the seismic monitor near the source first captures the P-wave signal and transmits the data to the early warning center. When the information of 2 to 3 stations is summarized, the early warning center will analyze these signals and issue the first warning. Because the propagation speed of radio waves is far faster than that of seismic waves of 300000 km/s, it is possible that the early warning information may be sent to the area affected by the earthquake through smart phones, radio and television, microblogs, earthquake early warning information receiving servers and other terminals before the damage is formed.

If there is an earthquake near you, but you have not received the earthquake warning, you can turn on the switch with the intensity less than 2.0 in the earthquake warning, and then you can receive the warning no matter how small the earthquake is. If you have other questions about Ace 2, you can continue to search in the mobile cat.