IQOO 10 pro Rear Cover Material Introduction
With the rapid launch of smart phones, the performance and configuration of flagship phones of many brands are almost the same, so most of the partners begin to pay attention to the design cost of the phone itself. What material is used for the back cover of iQOO 10 pro, the latest mid tier flagship model of IQOO? Now let's make a detailed introduction!
iQOO 10 pro Rear Cover Material Introduction
The back cover of the iQOO10Pro is an ordinary glass back cover. Although it has a certain durability, it is the same as most phone back covers on the whole. But the back cover of last year's iQOO9Pro race track version was made of aramid fiber. The aramid fiber has the characteristics of low density, high strength, good toughness, high temperature resistance, and will not interfere with the signal like the metal material. At the same time, the 3D back cover made of aramid fiber is only 12.34g, which would be lighter than the glass version.
The iQOO 10 pro uses a 6.78-inch 2K resolution 120Hz high brush AMOLED screen, supports 10bit color depth and LTPO adaptive refresh, and uses fingerprint under the wide area ultrasonic screen.
In terms of image: 16 million pixel front lens, two 50 million pixel lenses and one 14.6 million pixel lens for the rear three cameras, and the camera will have vivo self-developed ISP image chip V1+
Performance: The machine is equipped with Qualcomm's flagship processor Snapdragon 8+. IQOO 10 Pro adopts dual cell design, and two 2275mAh batteries form 4550mAh rated minimum capacity
Fuselage: the thickness of the fuselage is 9.49mm and the weight reaches 216.2g.
The above is the specific introduction of the iQOO 10 pro back cover material. I believe this phone has not disappointed you! This mobile phone has guaranteed the hardware configuration without sacrificing the design cost. It can be said that the cost performance ratio is very high. What are you waiting for? Let's try it now!
