How to solve the signal difference of Xiaomi MIX FOLD 2

The problem of poor signal on the mobile phone usually depends on where the user is. It is very normal to have poor signal in shielded places such as caves and tunnels. Sometimes there will be problems with the mobile phone system, resulting in no signal, no connection to the network and other problems, especially the mobile phones owned by Xiaomi. How to solve the problem of poor signal at this time? Xiaobian brings related solutions, which can be seen by users in need.

What should I do if the signal of Xiaomi MIX FOLD 2 is bad? Xiaomi MIX FOLD 2 Signal Difference Solution

The mobile phone can recognize the SIM card, but the signal is poor (weak signal), unable to make or receive calls; There are many reasons for poor mobile signal (weak signal), such as the surrounding environment, weather, location, operators themselves, common use habits (such as using metal protective sleeves), system failures, mobile phone hardware, etc; The following methods are recommended:

1. The phone cannot be dialed or received, but the signal bar of the mobile phone displays normally. First, check whether the SIM card is in arrears;

2. Select reasonable network type settings according to the operator of the SIM card used. It is recommended to select 4G first;

3. Whether this is also the case when trying to make a phone call in another location, such as outdoor, non interfering environment, etc. It is ruled out that the mobile phone signal is weak due to the poor signal of the operator due to the use environment (such as basement, tunnel, relatively closed buildings, etc.);

4. Determine whether it is the operator's own network problem. For example, check whether the network of the same operator used by colleagues or friends is normal. In addition, it does not rule out the reason for the aging of the SIM card. Try to replace a SIM card with the same operation and network;

5. Some protective cases on the market adopt large-area electroplating process in pursuit of beauty. The metal in them will shield the mobile phone signal, thus affecting the reception and transmission of the mobile phone signal. If such protective cases are used, it is recommended to temporarily remove them and check the signal;

6. It is recommended to check whether the MIUI version is the latest version (there are relevant prompts on the MIUI version page). It is recommended to update to the latest version of MIUI, and then check the mobile phone signal bar or make a call attempt;

7. After eliminating the external reasons such as the problems of the local network operator, the interference of the environment used, and the system problems, set up My Device>& gt; All Parameters>& gt; Status information - SIM card status, or enter * # * # 4636 # * # * *> in the dialing interface& gt; In the mobile phone information, check the signal strength of the mobile phone. Generally, it is - 50dbm_- 90dbm belongs to the relatively normal range. If it is above - 100dbm and occasionally jumps to the normal range, there may be some problems with the signal. You need to go to Xiaomi authorized repair service center with your mobile phone for detection and processing.

The above methods can effectively solve the signal problem of Xiaomi MIX FOLD 2. In different situations, there are corresponding solutions, which are very good. Users who need to save this page can save it in case they can't find a solution and cause losses.