Hongmeng 3.0.0.163 What to do with fast power consumption
Hongmeng 3.0.0.163 is a new system version launched by Huawei recently. It optimizes many functions for users and adds the function of super transit station. It is more convenient to share between multiple devices and applications in daily life. However, some of the partners found that their mobile phones consumed power quickly after updating the latest Hongmeng 3.0.0.163. How can we solve this problem? Now let's have a look!
Hongmeng 3.0.0.163 What to do if power consumption is fast
A series of self optimizing adaptation actions carried out in the background may lead to an increase in power consumption of the device in a short time. It is a normal phenomenon that the device will automatically recover its endurance after application adaptation after charging for more than 1 hour in idle time or after 2-3 days of normal use.
Not necessary, not self starting
Once the application is closed, it starts automatically -
In addition to email, social networking and other applications that need instant message reception, you can disable the self startup of other unnecessary applications by turning off the automatic management of applications to reduce the power consumption of background operations
Path: Mobile phone butler APP → Application startup management - turn off automatic management or settings → Applications and services → Application startup management - turn off automatic management
Adjust the screen out display mode
One setting screen off tap/smart display -
Adjust the screen off display mode to light touch display/intelligent display, that is, after touching the screen or when human eyes are detected watching, the screen off display will appear in the way of all day display, which can also appropriately extend the battery life of the device.
Path: Set a desktop and wallpaper, one off screen display, one display mode, one touch display/intelligent display
Note: Different products support this function slightly differently, please refer to the actual operation
Reduce data service power consumption
Once the intelligent traffic saving mode is enabled -
The power consumption of devices using data services is significantly higher than that using WLAN, especially in 5G environment. You can check the used traffic of the day through "Settings - Mobile Network - Traffic Management". In case of heavy use of data traffic, it is recommended to enable the intelligent flow saving mode
Path: Set up a mobile network - traffic management - intelligent traffic saving Note: After the intelligent traffic saving mode is enabled, email and social applications cannot receive new messages in the background, and images can only be displayed after clicking. At the same time, turn on the "network acceleration" and "WLAN+" switches, and under certain conditions, data services will be forcibly turned on under WLAN. If the above switches are properly turned off, the device's endurance can be extended, The "Network Acceleration" switch can close all applications or only the applications in use according to actual needs.
Path: Set a WLAN and turn off network acceleration
Settings → WLAN → More WLAN Settings Turn off WLAN+
Note: If you turn off network acceleration, you will not be able to use WLAN and mobile data at the same time. If WLAN or mobile data is unstable, you may not be able to effectively ensure network smoothness
The above is a detailed introduction of how to solve the problem of fast power consumption in 3.0.0.163 of Hongmeng. The new system is good on the whole. If the problem of fast power consumption still occurs two or three days after the above method, you can choose to go back to the previous system version to solve it, so you should pay attention to backup before updating the system version!
