Who is the strongest game chip, Tianji 9000 vs Kirin 9000
With the rapid development of science and technology, the mobile phone processor has also become more and more perfect. The flagship models of various brands have started to carry a variety of high-performance mobile phone processors, but we don't know which processor is more powerful just by looking at the parameters and specifications. So how does the powerful Tianji 9000 processor of MediaTek compare with the Kirin 9000 processor released two years ago? Come and have a look!
Who is the strongest game chip, Tianji 9000 vs Kirin 9000
I. Parameter Comparison
The Tianji 9000 adopts TSMC's 4nm process and eight core CPU design. It is specifically composed of one X2 super core with a dominant frequency of 3.05GHz, three A710 cores with a dominant frequency of 2.85GHz, and four A510 small cores with a dominant frequency of 1.8GHz. It supports 4-channel LPDDR 5X memory. The GPU is a 10 core Mali G710.
The Kirin 9000 adopts TSMC's 5nm process and eight core CPU design. It consists of one A77 super core with a dominant frequency of 3.13GHz, three A77 cores with a dominant frequency of 2.54GHz, and four A55 cores with a dominant frequency of 2.04GHz. It supports 4-channel LPDDR 5 memory. The GPU is a 24 core Mali-G78.
II. CPU Comparison
Comparing the specifications of the AP part, we can find that Tianji 9000 and Qilin 9000 both use the ARM public architecture, but Tianji 9000 uses a more advanced architecture. According to the CPU architecture roadmap, A77 is followed by A78 (X1), and then A710 (X2), so Tianji 9000's CPU architecture is two generations ahead. In terms of single core performance, although the X2 core used by Tianji 9000 has a lower frequency (less than 5%), it has a stronger IPC performance (more than 20%). Therefore, Tianji 9000 has obvious advantages in terms of single core performance.
As for the multi-core part, the frequency of the other three major cores of Tianji 9000 is about 13% higher. In the small core part, the performance of the A510 core IPC used by Tianji 9000 is improved by 35%, and the multi-core is also one of the top Tianji 9000. In GeekBench's five runs, the Kirin 9000 has a single core of 1003, the multi-core of 3640, and the Tianji 9000 has a single core of 1200+, and the multi-core of 4000+. From this score, the single core of the Tianji 9000 is more than 20% ahead, and the multi-core is about 10% ahead, which is similar to the theoretical analysis.
III. GPU Comparison
As for the GPU part, according to the official PPT of ARM, the comprehensive performance of Mali-G710 is more than 20% better than that of Mli-G78. However, in reality, we also need to consider the differences in the number and frequency of cores. From the number of cores, the number of GPU cores of Tianji 9000 is 10, while the number of GPUs of Qilin 9000 is 24. Although the number is much higher, it is very easy to heat up in actual operation due to the excessive size of the stack, It affects the performance.
Referring to the GPU score of Antu Rabbit, the GPU score of Kirin 9000 is around 30W, while the GPU score of Tianji 9000 is 35% higher than that of Snapdragon 888 according to the official data, and the GPU score of Antu Rabbit of Snapdragon 888 is also around 30W. Therefore, the GPU score of Tianji 9000 in Antu Rabbit has been above 40W, obviously stronger than that of Kirin 9000. In short, it should be no problem for Tianji 9000 to lead the other party by more than 35%.
IV. Score comparison
In fact, from the total score of Anthare, Tianji 9000 has exceeded 1 million, while Qilin 9000 is about 77W. This gap is obvious. Even if Tianji 9000 has a high score but a low ability, the AP will not be left behind by Qilin 9000 if it has so many high scores.
In addition to the AP, the ISP, AI, and baseband. From the paper data, the new Tianji 9000 is naturally very strong. However, considering that Qilin is not for sale, and only Huawei exclusively uses it, this comparison is unnecessary. However, it is precisely because of these exclusive things that Huawei handhelds have stabilized their high-end position. The strong AP is not enough.
V. Game Measurement
According to the relevant measured data, the Tianji 9000 and Kirin 9000 processors have been measured by King Glory, Genshin Impact and Peace Elite for half an hour. According to the data, the average frame rate of the Tianji 9000 processor when facing the game of King Glory is 59.9 frames, while the Kirin 9000 processor is 59.7 frames
In the game of Genshin Impact, the Tianji 9000 processor is stable at 53.4 frames, and the Kirin 9000 processor is 49.1 frames. In the game of Peace Elite, the Tianji 9000 processor is 59.4 frames, and the Kirin 9000 processor is 58.2 frames. From the above data, we can see that the OPPO Find X5 Pro Tianji version has basically reached the full frame running state, and the performance of the Kirin 9000 processor is also quite good, reaching the due level.
The above is a comparison between the Tianji 9000 processor and the Kirin 9000 processor. In all aspects, the Tianji 9000 processor was released more than a year later than the Kirin processor, and its performance is still better than the Kirin 9000 processor. You can consider purchasing the corresponding handheld devices!
